Roof Console FAQs

Yes, we can supply replacement lights for our roof consoles. As the light styles vary between console designs and have changed over the years, we will need clear photos of your existing console and lights to identify the correct replacement. Please email us or use the contact form below, and our team will assist you from there.

In mid-2016, Toyota added curtain airbags to the 79 Series Single Cab. These airbags are located where the grab handles are, which are used as mounting points for this console. For safety reasons, it’s not possible to install anything that goes across the windscreen in newer 79 Series Single Cabs.

The design change occurred around mid-2016. If your vehicle has curtain airbags and DPF, it’s not compatible with the T Shape Roof Console.

• New (mid-2016+) models: indent where the grab handle is above the doors
• Old (up to mid-2016): no indent above the doors

Yes — all consoles are made to order. Provide your UHF model, and we’ll cut a provision to suit. If your UHF uses a handpiece for all controls, we’ll recommend the best mounting option.

Marine plywood and steel — no plastic. Upholstered in your choice of vinyl.

No drilling required. Fits using the rear-view mirror, grab handle captive nuts, and interior light screw holes. All consoles come with a fitting kit and instructions.

The approximate storage dimensions are: Front storage openings Depth: 140 mm Opening width: 235 mm Opening height: 70 mm at the front, tapering down to 40 mm Angled storage openings Opening width: 290 mm Centre storage compartment Opening width: 300 mm Internal depth: 202 mm Please note that measurements are approximate and may vary slightly between vehicle models and console designs.

No — it uses existing grab handle captive nuts and sun visor mounting screws.

The new curtain airbags are located at the grab handle mounting points, making it unsafe to fit across the windscreen.

The front is netted, with the opening measuring at 355mm. The storage opening height is approximately 70 mm at the front and 40mm inside; the depth is 140mm.

Yes — made to order. Provide your UHF model and we’ll cut a provision to suit.

Marine plywood and steel — no plastic. Upholstered in your choice of vinyl.

No — it uses existing grab handle captive nuts and sun visor mounting screws.

Curtain airbags now occupy the grab handle area, making it unsafe to install items across the windscreen.

The front lip is minimal, measuring approximately 10mm high. The storage opening height is approximately 70 mm at the front and 40mm inside; the depth is 140mm. The lip is designed to help retain small, lightweight items; however, it is not a fully enclosed storage compartment. If you plan on storing a larger number of items overhead, we recommend considering one of our Full Facia, Centre Roof or T-Shape Roof Consoles, as these designs include netted storage compartments for greater security.

Marine plywood and steel — no plastic. Upholstered in your choice of vinyl.

Curtain airbags are positioned above the doors in these models, and our cross-windscreen consoles would interfere with them, making it illegal and unsafe to install.

Yes — made to order. Provide your UHF model, and we’ll cut a provision to suit.

The storage opening internally is 202 mm wide. However, the length of the storage opening on the side varies model to model.

Marine plywood and steel — no plastic. Upholstered in your choice of vinyl.

No drilling required. Fits using the rear-view mirror and interior light screw holes. Includes a fitting kit and instructions.